Nationwide Customer Service 1.800.245.8339 - Hours: 7:30 - 5:00 PM
   
   
  Directional Drilling Products - Swivels & Pulling Eyes
 



Swivels


Swivels: Condux Directional Boring Swivels are designed specifically for directional drilling. The 819 D.Drill Swivels prevent boring equipment’s rotational torque from interfering with the product (cable or conduit) being pulled. These swivels are greasable and double sealed to keep contaminates out. Clevis pins with hex nuts allow for installation and removal from either side of the swivel.


Flange Swivels

Flange Swivels

 


PE & PVC Pulling Eyes



Condux PE & PVC Pulling Eyes provide optimum gripping power and a watertight design. The watertight pulling eyes feature a multiple o-ring configuration, an extremely rigid center rod to prevent bending and a steel tapered lead cone with the same OD as the conduit. These design features protect the outer leading edge of the conduit and form a watertight seal. The Condux PE & PVC Pulling Eyes also feature split gripping segments with aggressive gripping threads coupled with a steel expander plug that better grips the full range of conduit ID’s.

Installation of the PE & PVC Pulling Eyes simply requires the leading eye to be tightened. The pulling eyes come standard with attachment eyes at both ends for connecting rope or steel lines. Pull-out strengths generally exceed the tensile capacity of the conduit.


Bell Pullers


Bell Puller: With the enormous amount of HDD installation going on today, GUS offers the solutions to Multiple installations with the Multi-Puller™.

Available in different sizes to accommodate different numbers of different sizes of duct, the Multi-Puller™ will keep the ducts up close to the reamer and the bell shape will protect the leading edges of every duct, as well as helping to pack the hole ahead of the ducts.


DCD Dub-Lite™ HDD Pullback Swivels

For rigs in the 8,500 to 30,000 pound class

Product No Diameter Capacity (tons)
1501-200-01 2” 4-1/4
1501-200-02 2-1/4” 5
1501-200-03 2-1/2” 7-1/2
1501-200-04 2-1/2” 10
1501-200-05 3” 15

 

DCD Dub® HDD Pullback Swivels

For rigs in the 20,000 to 80,000 pound class

Product No Diameter Capacity (tons)
1501-100-01 2” 2-1/2
1501-100-02 3” 5
1501-100-03 4” 10
1501-100-04 4-3/4” 15
1501-100-05 5-3/4” 20
1501-100-06 6” 30
1501-100-07 6-1/2” 40
1501-100-08 7-1/2” 60
1501-100-09 9” 80

 

 


Click here for directions
to Georgia Underground.