| |
|
| • |
For foam or solid dielectric cable preparation |
| • |
Precision, two-step operation, no nicks or scratches to conductor |
| • |
Exact cable specific, connector specific cable preparation |
| • |
Length: 2 to 3 in (51 to 76mm) |
| • |
Weight: 2.25 to 3.25 oz (64 to 92g) |
|
|
| |
|
|
| |
|
Fast
and efficient removal of jackets form trunk and distribution coaxial
cables including oversized jackets and flooded cables. Preset JST
blade assures there is not scoring or nicking of the aluminum sheath.
By Cablematic.
| R-JST500T |
500 |
| R-JST625T |
625 |
| R-JST700T |
700 |
| R-JST750T |
750 |
| R-JST875T |
875 |
|
|
| |
|
|
| |
|
Combination
tool cores and strips in one fast and precise operation. In manual
or dirll operation, CST tools have a standard "T" handle
with a built-in 3/8 inch drill adapter. CST-R tools have a ratchet "T" handle
and a separate 3/8 inch drill adapter. This Cablematic tool features
a heat-treated sheath cutting blade that produces a smooth beveled
edge and can be replaced without replacing the entire tool. Strip
stops
are available for exact stripping lengths of .50 to 2.00 inches.
By Cablematic.
| R-CST412 |
412 |
| R-CST500 |
500 |
| R-CST625 |
625 |
| R-CST750 |
750 |
| R-CST875 |
875 |
| |
|
| R-CST565TX |
MC Trilogy |
| R-CST700TX |
565 |
| R-CST840 |
700 |
| |
COMM/SCOPE P3;
TIMES FIBER TX Cable |
| R-CST500MC |
500 |
| R-CST650MC |
650 |
| R-CST750MC |
750 |
|
|
| |
|
|
| |
|
Length: 8.81 in (226.00 mm)
Weight: 0.99 lbs. (454.0 g)
| • |
ACST offers an adjustable chamfering strip
stop |
| • |
Strip stop length changed by simple adjustment of external
screw in tool body |
| • |
Center conductor length can be adjusted from 1/2” (12.7mm)
to 2’’ (50.8mm) |
| • |
Integral strip stop chamfers the center conductor, negating
the need for a separate chamfering tool |
| • |
ACST retains all the same quality features of the standard
CST tool (heat treated coring bits, replaceable sheath
cutting blades) |
| • |
Available in T-handle or ratchet, and all are drill adaptable |
| • |
New drill adapter allows use of common “quick
disconnect” drill chucks |
|
|
| |
|
|
| |
|
Length: 2.61 in (67.00 mm)
Weight: 5.95 ounces (170.0g)
| • |
Specifically designed for CommScope® Quantum Reach® (QR)
cables and also prepares Alcatel Cable Benelux – ACW cable |
| • |
QRT Kits include a coring and stripping tool and a jacket stripping tool
(CSTQR & JSTQR) |
| • |
Manual or drill operation; CST tools have a standard "T" handle with
a built-in 3/8 inch (9.5mm) drill adapter |
| • |
Heat treated, sheath cutting blade produces a smooth beveled edge and
can be replaced without the expense of replacing the entire coring bit |
| • |
Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual
dielectric which remains on the conductor after coring and stripping |
| • |
JSTQR now conveniently snaps onto CSTQR for ease of storage |
| • |
QR Kits now in bronze anodized color for easy QR identification |
|
|
| |
|
|
| |
|
Length: 7.41 in (190.00 mm)
Weight: 1.48 lbs. (675.0 g)
| • |
Simultaneously strips the jacket, cores the dielectric,
strips the aluminum sheath and trims the conductor to the proper
length in one fast and precise operation on CommScope Quantum
Reach Cable |
| • |
Specifically designed for CommScope® QR cables,
also prepares Alcatel Cable Benelux – ACW cable |
| • |
Manual or drill operation; CST tools have a standard "T" handle
with a built-in 3/8 inch (9.5 mm) drill adapter; CST-R tools
have a ratchet "T" handle and a separate 3/8 inch (9.5 mm)
drill adapter |
| • |
Heat treated, sheath cutting blade produces a smooth beveled
edge and can be changed without the expense of replacing the
entire coring bit |
| • |
Preset jacket blade assures there is no scoring or nicking
of the aluminum sheath |
| • |
Rugged, durable all-metal construction |
| • |
Rugged, durable all-metal construction |
| • |
Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper
removes residual dielectric remaining on the conductor after
coring and stripping |
| • |
Not recommended for use on flooded cable |
| |
Jacket Blade: CB 6667H |
| • |
Sheath Cutting Blade: CB 60 |
|
|
| |
|
|
| |
|
CST-MC: Trilogy Coring & StrippingTools:
Specifically designed for Trilogy MC2 cables
Length: 8.31 in (213.00 mm)
Weight: 1.55 lbs. (709.0 g)
| • |
Manual or drill operation; CST tools have a standard "T" handle
with a built-in 3/8 inch (9.5 mm) drill adapter |
| • |
Double helix coring bit designed for fast and precise coring
and stripping of polyethylene disc/air dielectric cable |
| • |
Heat treated, sheath cutting blade produces a smooth, beveled
edge and can be replaced without the expense of replacing the
entire coring bit |
| • |
Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper
removes residual dielectric which remains on the conductor
after coring and stripping |
|
|
| |
|
|
| |
|
Tools
used for removing residual dielectric from the conductor of all
sizes of trunk and distribution cables, without scratching or nicking.
Finger grippers permit application of maximum force. The CC-100
has clear Plexiglas multiple V-shaped cleaning notches. The CC-200
is supplied with clear Plexiglas scraping blades. By Cablematic. Part
Number R-CC100
Part Number R-CC200 |
|
| |
|
|
| |
|
QCST
is the all-in-one tool that accurately strips the jacket, cores
out the dielectric strips and bevels the aluminum sheath. The
new design conveniently attaches the jacket stripper body to
the main body of the coring/stripping tool by means of a "Quick
Change" rotating body spring. By Cablematic.
| R-QCST500 |
500 |
| R-QCST625 |
625 |
| R-QCST700 |
700 |
| R-QCST750 |
750 |
| R-QCST875 |
875 |
|
|
| |
|
|
| |
|
| • |
The various SDT models are cable specific...model
SDT596-250 is for 59 and 6 series cable only, SDT11-250 is
for 11 series cable only, SDT596-250PB is for 5C series cable
only and SDT Coax 9 fro Coax 9 only |
| • |
NEW... now also available with built-in strip stop - see
model SDT596-250SS (SDT596-250 is standard tool) |
| • |
ONE STEP cable preparation precisely exposes the center conductor
and removes the proper length of jacket to SCTE and Bellcore
specifications |
| • |
SMALL ERGONOMIC BODY DESIGN fits into your hand for ease
of use and comfort, as well as your tool pouch |
| • |
Tool body constructed of LIGHTWEIGHT, impact resistant ‘Hi-Visibility
Red’ polymer |
| • |
No adjustments or extra tools required |
| • |
Select models for either .250 (1/4) braid preparation or
.125 (1/8) (Raychem EZF®) braid preparation (Note: Tool
is not intended for Plenum Series Cable Construction) |
| • |
Superior quality tool steel blade cassettes will perform
1500+ preparations under normal use |
| • |
Tool supplied with model specified cassette assembled in
tool and one spare cassette |
| • |
Unique ‘Cassette Ejector’ provides quick blade
cassette removal |
| • |
Replaceable blade cassettes are color coded and marked with
cable series type and braid preparation dimensions for easy
identification |
| • |
Made in the U.S.A. |
|
|
| |
|
|
| |
|
For CATV, MATV and STV type cable connectors
Length: 8.93 in (229.00 mm)
Weight: 1.61 lbs. (737.0 g)
| • |
Precision quality alloy steel jaws are self-bottoming
and will not over-crimp |
| • |
Toggle action delivers correct crimping force |
| • |
Rugged components for long, trouble-free performance |
| • |
Star wheel permits precise, easy compression adjustment |
| • |
Easy-to-read hex sizes stamped on frame |
| • |
Full-cushion handles will not slide off |
| • |
Rugged steel frame with heat treated pins for maximum strength
and operating life |
|
|
| |
|
|
| |
|
U.S Patent No: 5,934,137
Length: 6.94 in (178.00 mm)
Weight: 0.99 lbs. (454.0 g)
| • |
Plunger tip can be changed out to allow assembly of other
compression connectors (EX and SPL) |
| • |
Calibration/ gage block and hex wrench supplied with tool |
| • |
Configured with the new ‘Universal’ plunger tip, factory
preset and calibrated to assemble the following connectors: |
| • |
- Arris Digicon-S™ and T™; Corning Cabelcon-CX3; Corning
Gilbert ULTRAEASE™; PCT-DRS; PPC EX XL; Thomas & Betts SNAP-N-SEAL®'
Tratec SLC |
|
|
| |
|
|
| |
|
U.S Patent No: 5,934,137
Length: 6.94 in (178.00 mm)
Weight: 1 lbs. (455.0 g)
| • |
FX model tool has same new ‘Universal’ plunger
tip as the Universal Model but is ‘fixed’ (plunger tip factory
set, calibrated, and non-adjustable) |
| • |
Assembles the same connectors as the CAT-UNIVERSAL |
| • |
FX model does not allow future plunger tip changeover |
|
|
| |
|
|
| |
|
U.S Patent No: 5,934,137
Length: 7.29 in (187.00 mm)
Weight: 1.09 lbs. (500.0 g)
| • |
Unique new CAT allows assembly of series 59/6, 7,and 11 drop
connectors in one versatile tool |
| • |
Two sets of jaws, precision designed – one set for 59 & 6 connectors,
and another set for 7 & 11 connectors |
| • |
Field proven design based on original Cablematic® CAT design with
high strength cast aluminum body |
| • |
Spring loaded, split jaws position the cable and connector for easy insertion
and removal |
| • |
Available in a ‘fixed’ model (CAT-AS-FX) with a fixed,
factory set plunger tip that is non-adjustable. |
|
|
| |
|
|
| |
|
Length: 4.95 in (127.00 mm)
Weight: 3.47 ounces (99.0g)
| • |
For 59, 6, 7, & 11 series ‘F’ connectors |
| • |
Makes ‘F’ connector insertion fast and easy even
in cold temperatures |
| • |
Especially useful when using tri-shield and quad-shield cables |
| • |
Insures proper connector and cable interface |
| • |
Large plastic screwdriver-type handle provides leverage when
inserting ‘F’ connector to the drop cable |
| • |
Heat treated shank |
|
|
| |
|
|
| |
|
Length: 4.21 in (108.00 mm)
Weight: 2 ounces (57.0g)
| • |
LED indicates DC shorts, splitters, and other
self-grounding devices in cable |
| • |
Loud audio tone identifies line carrying signal |
| • |
Checks circuit integrity in new and/or installed cable |
| • |
Right angle male push-on connector lets you work in tight
areas |
| • |
Female push-on connector for speed toning |
| • |
Tests up to 5,000 ft (1500m) of cable |
| • |
Clips to shirt pocket for easy accessibility |
| • |
Battery included (12 volt) |
|
|
| |
|
|
| |
|
| • |
Used on Corning Gilbert GTP; PCT International
TPG; PDI Incorporated PTP-59, PTP-59LR, PTP-59-PB; PPC LFT & PST;
Signal Vision, Inc. SV-LT & SV-LTA; Viewsonics TR 75 GLT |
| • |
Available in two convenient lengths |
| • |
Longer and larger diameter on LTT-7 (1-1/4 inch/31.8mm diameter)
for better grip and leverage |
| • |
Smaller diameter handle on LTT-4 (1 inch/25.4 mm diameter)
provides easier access between trap shields on tap spigots |
| • |
Tip design keeps out foreign debris, which could interfere
with proper tool operation |
|
|
| |
|
|
| |
|
The
UP-B76, also known in the cabling business as The Banana Cutter
because of the distinctive yellow handles, is used by CATV installers
on coaxial cable all over the world. This clean cutting, one-handed
instrument is both lightweight and compact to fit into a tool pouch.
It is designed to function just like a tube cutter to eliminate
cable distortion during cable preparation. This tool was designed
to cut up to ¾" cable. The UP-B76 is the ideal tool for
telecommunication, computer and CATV industry applications. |
|
| |
|
|
| |
|
Like
our famous Banana Cutter, the UP-B95 is designed specifically to
cut coaxial cable. The difference is that we engineered a special
cutting blade surface that can cut a cable up to and including
1" in diameter. It is designed to function just like a tube cutter
to eliminate cable distortion during cable preparation. Like all
of our cutting tools, the UP-B95 is dropped forged tool steel and
hand-finished by our skilled craftsmen here in the USA. |
|
| |
|
|
| |
|
| • |
Prevent damage to equipment from over or under tightening |
| • |
Proper connectorization at ‘F’ connector interface
with factory preset torque setting |
| • |
Available in a range of straight head sizes |
| • |
Tap port re-threader on end of tool body |
| • |
Handy, removable belt loop |
|
|
| |
|
|
| |
|
| • |
For Times Fiber Communications (TFC) “Flexible
Feeder” (TX10-15 Low Loss Drop Feeder) Cable. |
| • |
Color coded and labeled for ease of proper tool identification |
| • |
- Green - TXFF for Standard cable construction |
| • |
- Blue – TXFF-Q for Quad Shield cable construction |
| • |
The first cut will prepare cable to proper center conductor
length. The second cut will remove the proper length of outer
jacket exposing the braid |
| • |
Replacement Blades: 1st cut: CB 26, 2nd cut: CB 60 |
|
|
| |
|
|
| |
|
| • |
ONE STEP cable preparation exposes
the center conductor and removes the jacket |
| • |
ONE TOOL, with inter-changeable blade cassettes,
will perform all the following cable industry standard
preparations: |
| • |
(NOTE: Tool is not intended for Plenum Series Cable
Construction) |
| • |
Prepares ALL 59, 6, 7, 11 drop cable constructions
as per SCTE and Bellcore specifications |
| • |
Made in the U.S.A. |
| • |
-- 1/4 inch (6.35mm) Braid preparation for Series 59,
6 7, 11 cable |
| • |
-- 1/8 inch (3.18mm) Braid preparation for Series 59,
6 ,7 11 cable |
| • |
Cassettes available for ¼ inch (6.35mm) or
1/8 inch (3.18mm) cable preparation: |
| • |
-- Series 59/6 Standard, Tri and Quad Shield cables |
| • |
-- Series 7 Standard, Tri and Quad Shield cables |
| • |
-- Series 11 Standard, Tri and Trilogy Quad Shield cables |
| • |
-- Series 11Q Belden, CommScope® and Times Fiber
Quad Shield cables |
| • |
Blade cassettes color-coded and marked with cable series
type and braid preparation dimensions for easy identification |
| • |
Unique cassette storage compartment holds two extra cassettes |
| • |
High impact, ‘Hi-Visibility Red’, polymer
construction |
| • |
Compact size fits in one hand |
| • |
Series 59, 6 and 7 cassettes are to be used in tool cavity
Side (A) only, Series 11 and 11Q in the opposite cavity
only |
| • |
No adjustments or extra tools required |
|
|
| |
|
|
| |
|
| • |
High leverage design for exceptional cutting
capability. |
| • |
Precision, one-hand shearing action. |
| • |
Cable-gripping shear-type jaws. |
| • |
Perfect for working in confined spaces. |
| • |
Can be carried in most tool pouches. |
| 63050 |
9-1/2" (241 mm) |
4/0 aluminum2/0 soft copper100-pair 24 AWG communications
wire |
red |
.90 |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
