| |
| |
|
| • |
The J2 Lasher is designed for maximum
service life. The cylindrical body help it slip more easily
through branches and obstructions. The built-in mechanical
brake prevents unintended reversal. |
| • |
Lash single or multiple aerial cables up to 3 in. diameter
across on suspension strand from 1/4 in. (6 mm) to 7/16 in. (11
mm). Factory modification allows accommodation of 1/2 in. (13
mm) strand if necessary. |
| • |
Each of two recessed magazines will hold a 1200 ft. coil of
.045 in. (365 m of 1.1 mm wire) lashing wire (or 450 ft. of .065
in.) |
| • |
Features a fast setup procedure, quick coil loading, and automatic
drum lock. |
| • |
Positive internal gear-to- gear mechanism has no chains or
belts to stretch, slip or break |
| • |
Supplied with a 6 ft. bridle rope assembly and snap hooks,
and an information and operation manual |
Part number GMP 86070 |
|
| |
|
|
| |
|
| • |
The C2 Cable Lasher has all the same high quality features
as the J2 Lasher. These include dual magazines allowing loading
of two 1200 ft. coils of .045 lashing wire, (365 m of 1.1 mm
wire) the ability to mount a lasher guard or "halo" into
pre drilled holes, and a built in brake to prevent backroll.
It is primarily used in new installations to lash small diameter
aerial cables to supporting strand with stainless steel lashing
wire.
|
| • |
Lash single or multiple cables up to 1 3/4 in.
(44 mm) diameter onto bare 1/4 in. to 3/8 in. Strand. |
| • |
Made from plated steel, stainless steel,
brass or aluminum. Contains sealed and self-lubricating bearings to minimize
maintenance and assure durability. |
| • |
Is furnished with a 6 ft. bridle rope assembly and snap hooks,
an information and operation manual and a rugged lightweight
storage chest |
Part number GMP
71422 |
|
|
 |
|
